The commercial and industrial (C&I) energy storage system is a professional electrical energy storage and intelligent energy management system developed for C&I power consumption scenarios such as industrial production enterprises, commercial complexes, industrial parks, supermarkets and data centers. It is mainly composed of core components including battery energy storage units, PCS (Power Conversion System), BMS (Battery Management System) and EMS (Energy Management System). Connecting the power grid with the power consumption side of C&I users, it realizes the storage, conversion, intelligent dispatching and optimal utilization of electrical energy. As an important part of the new power system, it can flexibly adjust the charging and discharging rhythm of electrical energy according to the power consumption demand of C&I users and the operation status of the power grid, and is a core solution for C&I users to optimize power consumption costs, ensure power supply safety and absorb new energy.

The commercial and industrial (C&I) energy storage system is a professional electrical energy storage and intelligent energy management system developed for C&I power consumption scenarios such as industrial production enterprises, commercial complexes, industrial parks, supermarkets and data centers. It is mainly composed of core components including battery energy storage units, PCS (Power Conversion System), BMS (Battery Management System) and EMS (Energy Management System). Connecting the power grid with the power consumption side of C&I users, it realizes the storage, conversion, intelligent dispatching and optimal utilization of electrical energy. As an important part of the new power system, it can flexibly adjust the charging and discharging rhythm of electrical energy according to the power consumption demand of C&I users and the operation status of the power grid, and is a core solution for C&I users to optimize power consumption costs, ensure power supply safety and absorb new energy.

· Integrated prefabrication: Core components are integrated into the container as a whole, prefabricated in the factory and delivered as a complete set.
· Rapid deployment: No complex civil engineering required, only simple on-site foundation construction, with short commissioning cycle.
· Safety protection: Equipped with built-in fireproof, explosion-proof, temperature control and other protection systems, complying with industry safety standards.
· Small footprint: Adapted to industrial and commercial scenarios such as factories and parks, with high space utilization.
· Easy O&M: Modular design for easy fault troubleshooting, supporting remote monitoring and operation & maintenance.
· Flexible expansion: Multiple containers can be paralleled, and the energy storage capacity can be adjusted on demand to match the change of power consumption needs.
· Economic efficiency: Flatten peak-valley electricity prices, reduce demand charges, and improve the power consumption efficiency of enterprises.
· Peak-valley arbitrage: Store electricity at low price periods and discharge at high price periods to cut enterprise power costs
· Demand charge management: Flatten power consumption peaks and reduce grid demand charge expenses
· Emergency power supply: Act as standby power in case of sudden power outage to ensure uninterrupted production and operation
· PV-storage integration: Match with industrial and commercial PV systems, store self-generated surplus power and improve PV absorption rate
· Peak shaving and valley filling: Respond to grid demands and smooth the peak-valley fluctuations of regional power consumption
· Power compensation: Compensate reactive power, optimize grid power supply quality and reduce power consumption losses
| Item | Value |
|---|---|
| DC Battery Parameters | |
| Battery Rated Energy (kWh) | 241 |
| Battery Rated Voltage (V) | 832 |
| Battery Voltage Range (V) | 752~923 |
| Battery Type | LFP |
| Battery Capacity (Ah) | 314 |
| Battery Cycle Life | 6,000 cycles (0.5C, 5%~95%DOD, 80%SOH) |
| Battery Standard Charge/Discharge Rate (C) | 0.5 |
| Battery Pack Series & Parallel | 1P260S |
| Module Cooling Method | Liquid Cooling |
| AC Parameters | |
| Rated AC Power (kW) | 125 |
| Maximum Power (kW) | 138 |
| Maximum Current (A) | 200 |
| Rated AC Voltage (V) | 400 |
| AC Voltage Range | ±15% |
| Rated AC Frequency (Hz) | 50/60 |
| Wiring Method | 3P+N+PE |
| Current Total Harmonic Distortion THDI | <3% (at rated power) |
| Power Factor | ≥0.99~1~1 |
| Voltage Total Harmonic Distortion THDU | <3% (linear load) |
| PCS Cooling Method | Air Cooling |
| Max. Efficiency | 98.5% |
| System Parameters | |
| Energy Round-trip Efficiency | ≥ 90 % |
| Protection Class | IP54 |
| Corrosion Resistance Class | C3 as default, C4/C5 optional |
| Fire Protection | Aerosol / FK-5-1-12 (optional) |
| Isolation Method | Non-isolated (transformer optional) |
| Relative Humidity | 0~95% (non-condensing) |
| Ambient Temperature | -30°C ~ 55°C (derating above 45°C) |
| Altitude | <3000m (derating applies above 2000m) |
| BMS Communication | CAN |
| EMS Communication | 4G/CAN/RS485 |
| Dimensions (mm) | 1330 * 1350 * 2300 |
| Weight (kg) | 3440 |
| Annual Attenuation Rate | <3% |
| Warranty | 5 years |
| Remark | Battery, EMS, BMS, PCS integrated cabinet, grid-connected system supported. |
Copyright © Anhui Box-E New Energy Technology Co., Ltd. All Rights Reserved - Privacy Policy - Blog