Home > Products > Energy storage system > Commercial and Industrial Energy Storage
The All-in-One Cabinet Home Energy Storage System is a pre-integrated solution that combines battery modules, Battery Management System (BMS), Power Conversion System (PCS), thermal management, and safety protection systems into a single unit. Featuring integrated industrial design for plug-and-play operation, it is specifically designed for household and commercial users seeking easy installation, high safety, clean aesthetics, and low maintenance requirements.
The All-in-One Cabinet Home Energy Storage System is a pre-integrated solution that combines battery modules, Battery Management System (BMS), Power Conversion System (PCS), thermal management, and safety protection systems into a single unit. Featuring integrated industrial design for plug-and-play operation, it is specifically designed for household and commercial users seeking easy installation, high safety, clean aesthetics, and low maintenance requirements.
|
Product Model |
BOX-E96AC |
|
DC battery Parameters |
|
|
Rated energy of battery |
96kWh |
|
Rated voltage of battery |
307.2V |
|
Battery voltage range |
273.6-340.8V |
|
Battery type |
LFP |
|
Battery energy |
314Ah |
|
Battery life cycle of 6000 cycles |
8,000cycles (0.5C,5%~95%DOD,80%SOH) |
|
Battery standard charge/discharge rate |
0.5C |
|
Battery pack series parallel |
1P96S |
|
Module cooling method |
Air-cooling |
|
PV Parameters |
|
|
PV input power |
96kW |
|
PV voltage range |
150~850V(MPPT) |
|
PV maximum current |
40*4A |
|
MPPT quantity/maximum input string number |
4/8 |
|
Communication Side Parameters |
|
|
Rated AC power |
50kW |
|
Rated AC current |
76A / 72.2A |
|
Rated AC frequency |
50 / 60Hz |
|
Wiring method |
400V , 3P+N+PE |
|
Current distortion THDI |
<3%( rated power) |
|
Power factor |
0.99/ -1-1 |
|
Voltage total harmonic distortion THDI |
<3%( linear loads) |
|
System Parameters |
|
|
Protection level |
IP55 |
|
Anti corrosion |
Grade C3 is the default option, C4/C5 is optional |
|
Fire |
Aerosol/perfluorohexane (optional) |
|
Isolation method |
Non isolated (optional transformer) |
|
Relative humidity |
0-95% (non condensing) |
|
Environmental temperature |
-20 ℃ - +50 ℃ (derating above 45 ℃) |
|
Altitude |
<3000m (applicable for downgrading above 2000 meters) |
|
BMS communication |
CAN |
|
EMS communication |
4G/CAN/RS485 |
|
Dimensions |
(width x depth x height) 887 * 1200 * 2054 mm |
|
Weight (Kg) |
371 |
|
Annual attenuation rate |
<3% |
|
Warranty |
5years |
Pre-Integrated Design: All internal wiring and testing are completed at the factory; on-site, simply connect to PV, grid, and loads for operation.
Simplified Installation: Saves over 60% installation time compared to traditional split systems; deployable by 2 technicians within 4 hours.
Plug-and-Play Interfaces: Standardized waterproof connectors with clear labeling for PV, grid, and load connections to prevent miswiring.
Integrated Protective Structure: IP54-rated enclosure, dustproof and waterproof, suitable for various environments like garages and basements.
Built-In Fire Suppression: Standard equipped with heptafluoropropane or novec 1230 automatic fire extinguishing system with cell-level thermal runaway detection and isolation.
Electrical Safety Design: Complete isolation between DC and AC sides, featuring lightning protection, surge protection, and leakage protection.
Efficient Thermal Management: Intelligent variable-frequency AC/heat pump system ensures stable operation across a wide temperature range of -20°C to 50°C.
Low-Noise Design: Operating noise < 45 dB (measured at 1 meter), suitable for indoor or semi-outdoor installation.
Adaptive Energy Saving: Automatically adjusts cooling power based on load and temperature, with standby power consumption < 20W.
Maintenance-Free Design: Fully sealed structure, no regular cleaning or upkeep required.
Clear Status Overview: 7-inch touchscreen displays real-time operational data with multi-language interface support.
Remote Intelligent Management: Real-time monitoring via mobile app/web portal, supports OTA remote updates and fault diagnosis.
General Households
New Residential Projects
Old Electrical Circuit Retrofits
Aesthetic-Sensitive Spaces
Community Convenience Stores/Small Supermarkets
Small Business Offices
Rural B&Bs & Inns
EV Charging Station Integration
Overseas Market Users
Rental Housing Projects
Emergency & Disaster Relief
Educational Institutions
Copyright © Anhui Box-E New Energy Technology Co., Ltd. All Rights Reserved - Privacy Policy - Blog
EN
